sales@electromotion.co.uk

Tel: +44 (0) 116 276 6341

×

Registration

Your Details

Login Information

or login

  •  

    December 2015 saw the launch of our new look website. We listened to our customers and spent months developing a more pleasing to the eye, mobile friendly (responsive) and easier to navigate site for all to use. We think it’s gone quite well and since then we’ve had:

     

    39,000 users

    from 182 countries

    152,000 unique page views

    most visitors looking for a lathe

    25% using a mobile or tablet

    88% TV watching, male technophiles!

     

    With an easier enquiry system, more machine video’s and better specification pages, we hope you’ve liked the improvement’s we’ve made over the last 12 months and continue to make us your one stop for quality used sheet metal machinery and machine tools

    So, don’t forget, If you'd like information on any of our great value machinery please call: 0116 276 6341 or email us at sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Friday, 25 November 2016Posted byElectro MotionCategoriesLathes, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • We have 11 horizontal borers in stock, from 5 trusted marques with 5 different spindle sizes, various tables and subtables, digital readouts and tailstock's. With 5 of them having video's, the only decision will be which one to see under power!

    Kearns Richards SH75 Horizontal Borer

    Manufacturers include Kearns Richards, TOS, Union, Juaristi and Giddings Lewis & Fraser. Above is one of our Kearns Richards SH75's that's at our Leicester warehouse.

    The 125mm spindle Union BFT 125/5 has a video showing it under power (click the picture above to watch the video).

    If you'd like information on any of our great value machinery please call: 0116 276 6341 or email us at sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Monday, 03 October 2016Posted byElectro MotionCategoriesEngineering, Horizontal Borers, Large Machines, Machine Tools
    Link to this news
  • With over 170 machines inside, the NEW Electro Motion brochure has arrived today at our Leicester office. 10,000 copies will need putting in envelopes and sent out in the next week or so. It's full to the brim of machine tools and fabrication machinery but If you can't wait to see it, go to our downloads page to get your copy now!

    Electro Motion Used Machinery Specialist

    If you'd like information on any of our great value machinery please call: 0116 276 6341 or email us at sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Thursday, 15 September 2016Posted byElectro MotionCategoriesBrochures, Engineering, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • With 35 horizontal bandsaws currently in stock, we're bound to have one that'd be just right for you. Semi or fully automatic, traditional or numerically controlled (NC), mounted on a swivel base or static and with capacities ranging from 229mm - 1100mm the choices are endless (well, nearly).

    Danobat CP12.11 Bandsaw

    We have 16 manufacturers in stock with multiple sizes just in case you're brand specific. These include: Amada, Behringer, Birket Cutmaster, Bomar, Cosen, Danobat, Do-All, Everising, Forte, Imet, Kasto, Mega, Sabi, Startrite and Zenith.

    Unused and used bandsaws give you the choice of age which is also reflected in the price, so whatever your budget we're sure to have the one for you.

    Zenith Bandsaw

    If you'd like information on our many bandsaws or any or our great value machinery please call: 0116 276 6341 or email us at sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Monday, 15 August 2016Posted byElectro MotionCategoriesBandsaw, Engineering, Machine Tools, New Machinery
    Link to this news
  • If you’re old enough to remember 1996, what did it mean to you? There was a royal divorce, a cloned sheep named Dolly, the DVD became widely available and Mad Cow Disease hit Britain.

    But for Electro Motion, it was the year that we launched our first website and we’re proud to say that in 1996 we were one of only 257,601 websites WORLD WIDE whereas there’s over 1 billion websites today (source internetlivestats.com).

    Electro Motion's 1st Website on Netscape

    It was a bold step back then and one that made the world a much smaller place. Making that investment helped bring ourselves, and the second hand machinery industry bang up to date and shaped the way we would do business today.

    Above is a visual of how the original website looked back in 1996 using "the" leading Netscape Navigator browser and by contrast, our new website launched early 2016.

    Electro Motion's Current Website

     

     

     

     

     

     

     

     

     

     

     

     

    We've come a long way since we started in 1948 and we like to think we're one of the best around but like all used machinery suppliers (and all suppliers for that matter) we're all trying to tell you that we're better than the rest, offer the best prices, the best service but until you take the plunge you'll never know. So, call us now on 0116 276 6341 and let us help you make the right choice for you.

    Now, on to a few other things that were happening 20 years ago in 1996

    Toy Story, originally released in 1995 but came to the UK in 1996.."to infinity and beyond"

    Take That broke hearts around the world and announced their split

    Spice Girls took the world by storm

    England crashed out of Euro '96 (sounds familiar)

    Nokia released the iconic 8110 "Matrix" mobile phone 

    Sir Steven Redgrave and Matthew Pinsent took gold at '96 Atlanta Olympic games

     

    That's just a tiny snippet of what else happened in 1996 (besides Electro Motion getting on "t'internet")

    Twitter | Facebook | YouTube | Google+

    Tuesday, 26 July 2016Posted byElectro MotionCategoriesEngineering, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • Whether you call it a vertical borer, a vertical turning lathe or even a vertical boring & turning machine, our Webster & Bennett 72" (1829mm) CNC borer features a retro fit GE Fanuc series 18i-T control, 6 station turret and 4 jaw chuck along with a fixed rail.

    Webster and Bennett Vertical Borer

    On the machines page on our website, there’s full specifications available to download as a PDF and also a video showing the machine in operation prior to moving to our premises.

    Webster and Bennett Borer Video

    This is just one of 22 Webster & Bennett vertical borers (VTL or vertical turning lathes) for sale. Table sizes range from 36", 48", 54", 65", 72” and 77” including CNC or conventional, single, double column, with or without elevating rails and all from the UK's largest used machinery supplier.

    If you'd like information on this or any of our great value used machinery please call +44 (0) 116 276 6341 or send an email and we’ll be in touch as soon as we can.

    Twitter | Facebook | YouTube | Google+

    Monday, 18 July 2016Posted byElectro MotionCategoriesEngineering, Machine Tools, Vertical Borer, Vertical Turning Lathe
    Link to this news
  • The Suter Alpha 5 spiral duct forming line has a range of 80-200mm and allows a strip width of 60-160mm whilst having a speed rate of 4-120 metres per minute. It comes complete with 30 forming heads and a whole host of extra units including a stamping, forming and slitting units. It also has a 5 metre run off table and a 1 ton Elmea decoiler. This is Electro Motion's stock no: 29914.

    Spiral Duct Forming Machine

    The Twin Seam automatic square duct former has a material width range of 500 - 1300mm and sheet thickness range of  0.5-1.5mm which allows for a 140mm x 140mm smallest duct to be formed. Coming with a programmable controller & 3 straightening/profiling sections for strengthening ribs on materials. Supplied with 3 material un-coilers. This is Electro Motion's stock no: 31989.

    Twin Seam Square Duct Machine

    Of course, this post would be incomplete without a generic photo of spiral & square ducting sections

    Square Spiral Ductwork Generic

    If you'd like this or any of our great value used machinery please call +44 (0) 116 276 6341 or send an email and we’ll be in touch as soon as we can.

    Twitter | Facebook | YouTube | Google+

    Wednesday, 29 June 2016Posted byElectro MotionCategoriesDuct Forming Machinery, Engineering, Sheet Metal and Fabrication Machinery
    Link to this news
  • Along with all of our used machinery, here at Electro Motion we’re having more and more new machines too. Two such new machines are our MyDay lathes, one at 2m between centres and the other at 1.5m.

    New Lathes at Electro Motion

    Both with height of centres at 335mm, swing over bed of 670mm and swing in gap of 890mm.  Featuring a fixed steady a travelling steady and taper turning attachment.

    A new MyDay lathe is cheaper than you think, Call 0116 276 6341 today to find out by how much.

    Twitter | Facebook | YouTube | Google+

    Friday, 10 June 2016Posted byElectro MotionCategoriesEngineering, Lathes, Machine Tools, New Machinery
    Link to this news
  • 2016 sees the Amada Group celebrating its 70th Anniversary which makes them 2 years older than Electro Motion! In our 68 years of supplying used machine tools and sheet metal fabricating machinery, there’s been over 500 Amada branded machines (including Amada Promecam and Amada Cutmaster) pass through our warehouses.

    Our Amada HFB 100 is one of thirteen Amada machines that we currently have in stock and features 100 ton x 3000mm capacity and a 6 axis OP2000 CNC control. Other Amada machines in stock vary from press brakes, guillotines, horizontal bandsaws to CNC punches

    Amada_Press_Brake_Electro_Motion

    If you'd like this or any of our great value used machinery please call +44 (0) 116 276 6341 or send an email and we’ll be in touch.

    Twitter | Facebook | YouTube | Google+
     
    Wednesday, 01 June 2016Posted byElectro MotionCategoriesCNC, Engineering, Press Brake, Sheet Metal and Fabrication Machinery
    Link to this news
  • We hope you've all got plans to relax this Spring Bank Holiday and let's hope the weather is great for at least one day (wherever you are in the world!). Electro Motion's offices will be closed Monday 30th and Tuesday 31st, re-opening Wednesday 1st June at 9am.

    Be Happy this Bank Holiday

    Our emails will be monitored over the weekend, so if you need to make contact in the meantime please send your emails to sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Friday, 27 May 2016Posted byElectro MotionCategoriesEngineering, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • Our Snow heavy duty vertical surface grinder is at our Leicester warehouse and ready for inspection. With a 1500mm x 500mm chuck, 600mm segmental wheel and a 1500mm x 500mm table it makes this a formidable grinder.

    Snow Grinder

    We currently have 8 grinders in stock from top manufacturers as Snow, Churchill, Naxos, Bryant and of course Lumsden.

    If you'd like to see any of our great value used machinery please call +44 (0) 116 276 6341 or send an email to sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Tuesday, 17 May 2016Posted byElectro MotionCategoriesEngineering, Grinding Machines, Machine Tools
    Link to this news
  • Leicester City Football Club have done it! After a nail biting season of close calls and fantastic football, Electro Motion are proud that their home team Leicester City have finally been crowned winners of the Barclays Premier League for the first time in their 132 year history. Well done to the whole team and management. 

    Electro Motion Congratulate LCFC on the Premier Title!

    Fondly referred to as the People's Champions, Leicester City FC have touched the hearts and imaginations of football fans and non fans alike from all over the world. The most notable of which is Hollywood star Tom Hanks who, in a recent interview at the premiere of his latest film Hologram for the King, claims to have put a £100 bet on Leicester winning the Premier League at the beginning of the season...hopefully he got the 5000-1 odds offered before the start of the season and it's time to cash in Tom!

    Tom Hanks & LCFC

    With huge celebrations already across Leicester, no doubt those waterlogged eyes will now be firmly fixed on the Champions League next season, we're behind you all the way!

    Of course, we're in the used machinery business and we couldn't write a news post without referring to at least one of our (blue) machines, so to address the balance below is one of our band saws just in case you missed our latest newsletter, you can sign up for those here (see what I did there?)

    Used Bandsaw at Electro Motion

    If you'd like to see any of our great value used machinery please call +44 (0) 116 276 6341 or send an email to sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Monday, 02 May 2016Posted byElectro MotionCategoriesLeicester City Football Club, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • If the answer is yes, why not take some time out and pay us a visit whilst you're in the Midlands? We've got lots of used machines available to look at our Leicester warehouse. With masses of used Machine Tools and Fabrication Machinery, we're bound to have something of interest.

    MACH 2016 visit Electro Motion

    Just click on this Google map for directions to our Leicester address, it'll take around 50 minutes from NEC Birmingham to reach us. We're open 9am - 5pm and if you'd like to let us know you're on your way you can call us on 0116 2766341.

    If you're using another satnav our postcode doesn't always work so you can use LE4 9LF which'll get you there. We look forward to seeing you :)

    Twitter | Facebook | YouTube | Google+

    Thursday, 07 April 2016Posted byElectro MotionCategoriesExhibitions, Machine Tools, Sheet Metal and Fabrication Machinery
    Link to this news
  • Well, we've been in business since 1948 and in that time we've sold around 400 Colchester lathes to large and small businesses throughout the world.

    Models such as the Colchester Bantam, Chipmaster, Colt, Magnum, Master, Mascot, Mastiff, Student, Tornado and the trusty Triumph have been a regular at Electro Motion over the past 68 years and still are today.

     

    Below is a Colchester Student 1800 that was sold by us 16 years ago

    Colchester Student 1800

     

    Looking back through our archives, we've also found an early Colchester "Electronic" CNC Mastiff manufactured back in 1995 featuring a Fanuc 20-T CNC control and it's probably still going strong today.

    Colchester CNC Mastiff

     

    One of our current stock of Colchester lathes is the Mastiff 1400 (below) with a height of centres of 266mm and a between centres of 2032mm. 

    Used Colchester Mastiff at Electro Motion

     

    If you'd like to see it or any of our great value used machinery please contact us on +44 (0) 116 276 6341 or send an email to sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Thursday, 31 March 2016Posted byElectro MotionCategoriesLathes, Machine Tools
    Link to this news
  • A comprehensive range of industrial machinery. With over 250 machine tools, sheet metal and fabrication machines in stock, we’re confident that you’ll find that press brake to go with that guillotine or the ideal borer for your business.

    Visit our website for that great range of used machinery

    If you'd like to see any of our great value used machinery please contact us on +44 (0) 116 276 6341 or send an email to sales@electromotion.co.uk

    Twitter | Facebook | YouTube | Google+

    Friday, 26 February 2016Posted byElectro MotionCategoriesEngineering, Sheet Metal and Fabrication Machinery
    Link to this news