|
Driving Directions:
FROM A46 (LEICESTER)
-
Proceed out of Leicester on A46 Nottingham/Newark Road.
-
Exit A46 at Six Hills junction (Durham Ox) sign posted B676 Loughborough/Melton
Mowbray, down slip road and at T junction turn left to Melton Mowbray.
-
At next junction cross over A6006 (turn right then immediately left).
-
At next junction cross over A606.
-
Keep straight on until next junction, bear left sign posted Long Clawson and
follow heavy goods vehicle signs for Hose.
-
Continue along road, until you reach a large barn on the right. Take next left
turn, sign posted Long Clawson - Hose - Colston Bassett.
-
Continue along road to Long Clawson just prior to junction garage on right hand
side. At junction take road to right, however, due to curve of road, actually
go straight on sign posted Hose and Harby.
-
As road bends round to the right sign posted to Hose, turn left towards Colston
Bassett, continue along road to first right turn, take this road back towards
Hose over walled bridge and our new factory is situated on the right hand side.
FROM A47 (NORWICH)
-
Take the A47 out of Norwich. Continue along A47 through Kings Lynn.
-
At Wansford, take the A1 north signposted Nottingham (A52).
-
At Grantham take the A52 towards Nottingham
-
After approximately 14 miles turn left of the A52, signposted Langar &
Harby.
-
After approx 8 miles, you will pass through Harby village, take the next right
signposted Hose.
-
After 1/2 mile take the next right down Cole Lane.
-
Follow to T junction, and turn right. Electro Motion is 200 yards on the left
hand side.
FROM M1 Junction 21a
-
Leave M1 at Junction 21a, shortly after services.
-
Follow A46 Western Bypass to the end - approx 10 miles.
-
At roundabout take left exit signed Nottingham and proceed along A46
Nottingham/Newark Road.
-
Exit A46 at Six Hills junction (Route 66) sign posted B676 Loughborough/Melton
Mowbray, down slip road and at T junction turn left to Melton Mowbray.
-
At next junction cross over A6006 (turn right then immediately left).
-
At next junction cross over A606.
-
Keep straight on until next junction, bear left sign posted Long Clawson and
follow heavy goods vehicle signs for Hose.
-
Continue along road, until you reach a large barn on the right. Take left turn,
sign posted Long Clawson - Hose - Colston Bassett.
-
Continue along road to Long Clawson just prior to junction garage on right hand
side. At junction take road to right, however, due to curve of road, actually
go straight on sign posted Hose and Harby.
-
As road bends round to the right sign posted to Hose, turn left towards Colston
Bassett, continue along road to first right turn, take this road back towards
Hose over walled bridge and our new factory is situated on the right hand side.
FROM M1 JUNCTION 25
-
Leave M1 at Junction 25
-
Take A52, Ring Road south of Nottingham.
-
Continue on A52 out of Nottingham
-
Cross straight over A46 at Bingham Roundabout, still on A52
-
Take next Right, sign-posted Langar & Harby
-
After Harby follow signs to Hose
-
When reach Hose carry on straight through - do not take side roads
-
When out of Hose after about 1 mile there is a sharp right hand bend. After
bend take immediate right sign-posted Colston Bassett, this goes on to single
lane.
-
Go down for approx 1.1/2 miles and over hump backed bridge. After bridge you
will see sign post for Hose, turn right over new bridge.
-
Our factory is on right hand side after approx 1/2 mile
FROM M69
-
After leaving M69 follow signs to M1 North, you will join M1 at Junction 21.
-
Leave M1 at Junction 21a, shortly after services.
-
Follow A46 Western Bypass to the end - approx 10 miles.
-
At roundabout take left exit signed Nottingham and proceed along
-
A46 Nottingham/Newark Road.
-
Exit A46 at Six Hills junction (Route 66) sign posted B676 Loughborough/Melton
Mowbray, down slip road and at T junction turn left to Melton Mowbray.
-
At next junction cross over A6006 (turn right then immediately left).
-
At next junction cross over A606.
-
Keep straight on until next junction, bear left sign posted Long Clawson and
follow heavy goods vehicle signs for Hose.
-
Continue along road, until you reach a large barn on the right. Take left turn,
sign posted Long Clawson - Hose - Colston Bassett.
-
Continue along road to Long Clawson just prior to junction garage on right hand
side. At junction take road to right, however, due to curve of road, actually
go straight on sign posted Hose and Harby.
-
As road bends round to the right sign posted to Hose, turn left towards Colston
Bassett, continue along road to first right turn, take this road back towards
Hose over walled bridge and our new factory is situated on the right hand side.
FROM A46 (NORTH)
-
Proceed from North on A46 Nottingham/Newark Road towards Leicester.
-
Exit A46 at Six Hills junction (Wild Ox Hotel) sign posted B676
Loughborough/Melton Mowbray, down slip road and at T junction turn right to
Melton Mowbray.
-
At next junction cross over A6006 (turn right then immediately left).
-
At next junction cross over A606.
-
Keep straight on until next junction, bear left sign posted Long Clawson and
follow heavy goods vehicle signs for Hose.
-
Continue along road, until you reach a large barn on the right. Take next left
turn, sign posted Long Clawson - Hose - Colston Bassett.
-
Continue along road to Long Clawson just prior to junction garage on right hand
side. At junction take road to right, however, due to curve of road, actually
go straight on sign posted Hose and Harby.
-
As road bends round to the right sign posted to Hose, turn left towards Colston
Bassett, continue along road to first right turn, take this road back towards
Hose over walled bridge and our new factory is situated on the right hand side.
|